How to Refashion a Prom Dress to Bomber Jacket

Before and after of my prom dress to bomber jacket refashion.

I’m seeing bomber jackets everywhere – in blogs, in magazines and on the streets.  It’s a fun, fall trend I wanted to add my own spin to.  When I saw this Asian inspired bomber jacket from Urban Outfitters on a co-worker,  I became obsessed with making my own.

This Urban Outfitters bomber jacket was the inspiration for my bomber jacket refashion from an old prom dress

I had the perfect Jessica McClintock prom dress with a satiny floral brocade that would add a pretty chinoise touch to the bomber jacket.  Before I dive into the tutorial portion of this refashion, I have to share with you a weird, funky embellishment that severely limited what I could do with this dress.

Prom dress with weird bustle

WTF?  That is one butt ugly bustle.  What were they thinking?  Most women I know want to minimize their backside, not call attention to it!  I bought this impulsively at the thrift store and didn’t bother to look at the back as I was in a rush.  Note to self – carefully inspect everything you buy at the thrift store!   If I had enough of the brocade fabric, I would have used it for the bodice of the bomber jacket.  Instead, I had just enough fabric to make the sleeves.  Luckily, I found a red skirt at the thrift store in a perfectly matching shade of red to use for the rest of the jacket.

Here’s a quick and dirty overview of this refashion:

  1. Cut sleeves and bodice from the outer fabric and lining
  2. Add floral applique
  3. Add pockets and sew sleeves to bodice
  4. Attach ribbed collar, cuffs and waist
  5. Attach the zipper
  6. Sew lining to jacket

Step 1:  Cut sleeves and bodies from outer fabric and lining

I used Christine Haynes Emery Dress pattern to make my bomber jacked from a recycled prom dress.

I repurposed the bodice and sleeves from my Christine Haynes Emery Dress pattern piece for the jacket.  To make this a loose fitting jacket, I omitted the bust dart and extended the sides straight down from the arm hole.  I used the lining of the skirt and dress for the lining of my jacket.

Step 2:  Add floral applique

I was concerned the solid red bodice would be too blah, and I was determined to do something creative with that stupid bustle, so I made a floral applique that mimicked the floral pattern in the black brocade.  After a day surfing the internet for the perfect pattern, I found this Japanese crest on Dreamstine.


I used a Japanese crest as my applique pattern for the back of my prom-dresss-to-bomber-jacket refashion

My favorite fusible web for this kind of applique is a double sided fusible by Heat and Bond.  It’s easy to apply, holds up well in washing and adheres securely to any kind of fabric.  I don’t have any affiliation with Heat and Bond – I’m just a big fan.

I fused heat and bond to the wrong side of the fabric and traced the floral pattern on the paper side of the fusible.

After fusing Heat and Bond to the wrong side of the fabric, I traced the floral pattern on the paper side of the fusible and cut out all the pieces.

Apply floral pieces to the back of the bodice and iron in place.

Apply floral pieces to the back of the bodice and iron in place.

Peel off the paper backing, place all the pieces on the back of the jacket with the fusible side down and iron in place.  To fake an embroidered look, I top stitched all the edges.  Just for kicks, I made a smaller version for the front of the jacket.

Step 3:  Add pockets and sew sleeves to bodice


Cut out 4 rectangles for the pockets.

Cut out 4 rectangles for the pockets.

To make the pockets, I cut out 4 rectangles from the bustle.  Yeah, I know they don’t look like your typical pockets, but I thought it would be fun to make extra deep pockets that extended all the way to the the zipper.  I stole this idea from a jacket I found surfing the net for ideas to knock off.

Sew pockets to the sides of the bodice.


With right sides together, sew each pocket to the sides of the bodice.


Sew bodice at the shoulder seam.

With right sides together, sew the bodice at the shoulder seam

Attach the sleeves using the flat technique.

Attach sleeves using the flat technique.

Sew the sides of the jacket and around the pocket.

Pin the sides of sleeves and bodice together.  Extend the pockets from the bodice and pin around the edges.  Sew all side seams and sew around the pockets. This is what the pocket opening looks like from the side seam.

Side pocket of bomber jacket.


For the lining, repeat the above steps but skip the pockets.

Step 4:  Attach ribbed collar, cuffs and waist

For the ribbed collar, cuffs and waist, I used a black turtleneck sweater.

I used a black turtleneck for the ribbed collar, cuffs and waist of my bomber jacket.

For the collar, chop off about 6″ from the bottom of the turtleneck.  Cut out the side seam on one end, and on the other, cut out a slight curve.  Sew the collar at the curve.  This curve is critical to getting the collar to lie flat against the neck, otherwise the collar will stand straight up, leaving a weird gap at the neck.  Fold the collar in half and taper the ends.  Your collar should look something like this.Collar for the bomber jacket refashion.

Pin the collar to the neck and sew in place.

Attach collar to the neck of bodice.

Cut 2 cuffs and waist from the rest of the black sweater.  I cut 2 rectangles about 6″ wide and 7″ long.  Sew the ends together and fold in half.

Pin and sew cuffs to the bomber jacket sleeves.

Sew cuffs to bomber jacket sleeves

Your cuff should look like this.

Make bomber jacket cuffs from black sweater.

Making and attaching the waist is the same process, except don’t sew the ends together.

Step 5 – Attach the zipper 

Attach zipper to the bomber jacket.

Pin and sew the zipper to the front of the jacket.

Step 6:  Sew lining to jacket

This step is a tutorial in itself.  Rather than bore you with a step by step overview, I’m going to direct you to this great tutorial by Grainline Studios.  This was my first time lining a jacket, and this tutorial was super helpful.

Here’s a view of the finished bomber jacket from the front . . .

Front of the refashioned bomber jacket.

and here’s a view of the back.

Back of finished bomber jacket.


This was my most ambitious refashion to date and took me 2 solid weekends to make.  It was also one of my most expensive projects, about $18 all in with the zipper.  Lining the jacket wasn’t hard but it took longer than I expected.  I think the end result was worth the time and money.  What do you think?

Follow my blog with Bloglovin
There are 12 comments for this article
  1. Bonnie Webster at 3:55 pm

    I am incredibly impressed with you. I have been sewing for over 58 years. Your frugal sensibility in this “throwaway” world, sewing skills and creativity are a joy to behold!

  2. Pingback: Customize Old Jeans with No-Sew DIY Appliques - Trevor Loves Mommy

Leave a Reply

Your email address will not be published. Required fields are marked *